– Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000) Offers

Hi there, I do believe you are interested in a product, and that means you tend to be on the correct post. Currently you are studying considered one of my submit with regards to Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000). And also Lets hope you will find some practical facts before you buy item. Currently I would like to compose much more fine detail about Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000). This device Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000), it can be produced by Microflex firm.

The real Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000) Information:

The Microflex PowerGrip disposable, powdered, standard length latex glove is fully textured along the fingertips, fingers, and palm and is thicker at the palm and fingers to help protect the hand. It has a palm thickness of 5.9 mils and a finger thickness of 6.7 mils and is 9.6″ long from the tip of the middle finger to the edge of the beaded wrist cuff, which is 3.9 mils thick. It is suitable for automotive, dental, healthcare, industrial safety, and laboratory applications. Latex provides better elasticity than nitrile, chloroprene, or vinyl, and better puncture resistance than vinyl. The glove is textured on the fingertips, fingers, and palm for improved grip, particularly in wet conditions, compared to a glove with textured fingers. This powdered glove has cornstarch on the inside of the glove, making it easier to don and doff. The color of this ambidextrous glove is white.

Tensile strength, measured in megapascals (MPa), is the amount of force required to rip a glove; the higher the number, the stronger the glove material. This glove has a tensile strength of 22 MPa before aging and 19 MPa after aging. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage, and the higher the percent, the more the glove can stretch. This glove has an elongation of 750% before aging and 600% after aging. Acceptable Quality Level (AQL) is a Food and Drug Administration (FDA) quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves. This glove has an AQL of 1.5, which means the defect level from a large sample of the gloves will not exceed 1.5%. Microflex examination gloves meet or exceed applicable standards imposed by ASTM International, formerly known as the American Society for Testing and Materials (ASTM), and the FDA.

Disposable and limited-use gloves are used in medical, forensic, scientific, art, and industrial applications. Gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for either hand, some can be purchased in hand-specific models. They are offered powdered or powder-free; silicone or silicone-free; chlorinated or non-chlorinated; coated or uncoated; with a standard- or extended-length cuff; sterile or non-sterile; and with textured or smooth fingers, fingertips, and palms. A glove’s abrasion, cut, and puncture resistance is defined by glove material and thickness, and may be improved with the use of certain exterior coatings. Abrasion resistance means the glove helps protect the hand from contact with rough objects. Cut resistance means the glove helps protect the hand from blades and sharp instruments. Puncture resistance means the glove helps protect the hand from pointed objects such as pins and needles. Chemical resistance means the glove helps protect the hand from certain chemicals. Chemical resistance is defined by glove material, thickness, and length, as well as the work environment and chemicals likely to be encountered. For information on the chemical resistance of this glove, consult the manufacturer’s chemical resistance guide.

Microflex Corporation manufactures disposable gloves. The company, founded in 1988 and headquartered in Reno, NV, meets International Organization for Standardization (ISO) 13485:2003.

And then if you need to know about Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000) value, attribute along with product reviews via buyer, you can click on THIS LINK . I hope this submit can help you to end up buying Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000) product, or perhaps that post will let you to find additional merchandise that is certainly or better than Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000) as well as related.

Below are a few this pictures of Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000):

The Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000) Price :

Check Current Price

When you finally understand our post Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000). Many of us be expecting that this Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000) merchandise is match to suit your needs. If you nevertheless ought to discover merchandise in addition to Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000), you need to use lookup box as well as discover with just about every class. Next if you choose to buy Microflex PowerGrip Latex Glove, Powdered, 9.6″ Length, 5.9 mils Thick, Medium (Pack of 1000), you need to simply click BUY BUTTON beneath.

Buy Now!

Buy Now